Product Description
BioGuard 1200V Multi-Test Kit allows you to easily test your pool or spa water at home. Test for Free Chlorine, pH, Total Alkalinity, Acid and Base Demand. This kit contains the following:
- Test Tube
- 50 DPD #1 Free Chlorine Test Tablets
- 1 oz #2 Reagent Phenol Red Indicator
- 1 oz #3 Reagent Acid Demand Titrant
- 1 oz #3B Reagent Alkali Demand Titrant
- 1/2 oz #4 Reagent Chlorine Neutralizer
- 1/2 oz #5 Reagent Methyl Orange Indicator
Directions
Test 1 Chlorine Residual (1.5 Ideal)
- Fill small tube to line.
- Add 1 DPD #1 Tablet.
- Invert several times to dissolve tablet and mix.
- Compare color chart with chlorine standard on the left.
Test 2 pH (7.4-7.6 Ideal)
- Fill large tube to top line.
- Add one drop Reagent 4 (If chlorine test shows over 3 ppm, add two drops), invert to mix.
- Add 5 drops Reagent 2. Invert to mix.
- Compare color with pH standards on the right.
Test 3 Acid Demand (if pH over 7.6)
- Use sample from pH test.
- Add Reagent 3 one drop at a time. Invert tube after each drop to mix. Count the drops added.
- When color matches that of 7.4 or 7.6 pH color standard, refer to acid dosage chart for required dosage.
Test 3B Alkali Demand (If pH below 7.4)
- Use sample from pH test.
- Add Reagent 3B one drop at a time. Shake tube vigorously to mix each drop. Count the drops added.
- When color matches that of 7.4 or 7.6 pH color standard, refer to alkali demand chart for required dosage.
Test 4 Total Alkalinity (125-150 ppm ideal for all pool surfaces)
- Fill large tube to bottom line.
- Add one drop of Reagent 4 and swirl.
- Add one drop of Reagent 5 and swirl.
- Add Reagent 3 one drop at a time. Swirl after each drop. Count drops added until color changes to orange or pink-orange.
- Number of drops of Reagent 3 times 10 equals total alkalinity.
Reviews
There are no reviews yet.